Saturday, November 1, 2008

Unisem Takes Copper Wire Bonding Process to Volume Production

by: Semiconductor.net

Unisem Takes Copper Wire Bonding Process to Volume Production

Unisem plans to set up 30% of its wirebonders for copper by 2009. The industry's interest in copper wirebonding is being driven largely by copper's enhanced performance characteristics.

Sally Cole Johnson, Contributing Editor -- Semiconductor International, 10/15/2008 9:23:00 AM

Weekly Top 5
Unisem Group (Kuala Lumpur, Malaysia) is taking its copper wire bonding technology to volume shipment, now that Integrated Device Technology (IDT, San Jose) and several other IC manufacturers have qualified the process. And in response to increasing customer demand, Unisem plans to set up 30% of its wire bonders for copper by 2009.

The industry’s shift from gold to copper wire bonding is being driven largely by the enhanced performance characteristics of copper, such as its high tensile strength, thermal conductivity, lower electrical resistance and better performance during high-temperature storage tests. IDT, for example, recognized the traction copper is gaining as an interconnect material in semiconductor packaging, and is using Unisem’s copper wire bonds in its thin shrink small outline packages. “The clear advantages of copper — better performance and higher electrical test yields — helped convince us of the strategic benefits of copper wire,” said Anne Katz, IDT’s vice president of worldwide assembly and test.

Unisem sees material advantages to using copper wire bonds.
Unisem sees material advantages to using copper wire bonds.
“Copper has turned out to be a key enabler in the packaging industry from both technology and cost perspectives,” pointed out Mike McKerreghan, chief operating officer of Unisem’s Batam, Indonesia, factory. “Today, the most commonly used conductor metals in the IC industry are gold, aluminum, silver alloy and copper. Gold is the most widely used metal for IC wire bonding because of its resistance to surface corrosion and high productivity through the gold ball bonding process. However, the price of gold has risen significantly — by more than 50% during the past 18 months. The upward trend in gold base price has spurred customer interest in gold wire replacement, which helps reduce cost without diminishing conductivity, chip functionality and reliability.”

Aluminum is presently used on discrete/power devices because of its current carrying capacity. “There are two trade-offs, though,” McKerreghan explained. “First, a lower productivity of wedge bonding compared to gold ball bonding. The second is a lack of flexibility to cope with complex wire layouts such as multi-tier and long wire lengths.”

Silver alloy is more conductive than gold and uses the same ball bonding process, according to McKerreghan, but has inconsistent pressure cooker test performance. Copper is also more conductive than gold and is considerably cheaper. “It uses the same ball bonding process with the addition of a forming gas to provide an inert environment during free air ball formation,” McKerreghan said. “Copper/aluminum intermetallics have considerably slower inter-diffusion than gold/aluminum intermetallics, which prevents Kirkendall voiding, ensuring better performance during high-temperature storage tests. Heavy copper wire, ≥2.0 mils in diameter, is already widely used in the industry today for power applications. With these, copper is selected as the most suitable replacement for gold wire.”

Although wire bonding remains the dominant form of interconnect between an IC and package, McKerreghan noted that the industry is beginning to see the need for flip-chip packaging because of the increase in device complexity, as well as being another way to remove the cost of gold from the equation with bumping materials such as copper and solder.

Saturday, June 28, 2008

Tape on Reel


Semiconductor Packaging Materials' patent-pending "Tape-on-Reel" packaging is a value-add process of placing stampings, typically capacitors, resistors, resistor networks and ceramic substrates, onto contact or pocket tape in an automated fashion. The process is used to support surface mount assembly operations, and accomplishes precision parts setting, orientation and handling. Since many of the Semiconductor Packaging Materials' stamped products are very small, Semiconductor Packaging Materials employs the use of highly automated equipment to perform this packaging function.


Prior to loading components on tape - the packaging department works with the customer to determine the proper carrier tape to use. Carrier tape is the tape that "carries" the part. Semiconductor Packaging Materials utilizes two different types of carrier tape - pocket (sometimes referred to as embossed) tape and surf tape. Pocket tape is appropriately described as it is a plastic tape embossed with pockets. During the taping process - the parts are placed in the pocket and then covered using a "cover tape" to keep the parts secure in the pocket. Pocket tape comes in both standard and custom sizes to meet the needs and usage requirements of the customer.


Semiconductor Packaging Materials pays significant attention to the proper selection of both the pocket and cover tapes. Size is one consideration, but other considerations include; the size of the reels, whether anti-static tape is needed, (either pocket or cover) whether conductive or non-conductive tapes are needed (either pocket or cover) and whether the cover tape should be heat or pressure activated.


Semiconductor Packaging Materials uses another form of carrier tape known as surf tape. Surf tape is tape with an adhesive back layer. This back layer holds the part in place without the use of a cover tape. Surf tape works well with small parts where exact orientation is important. By holding the parts with an adhesive - surf tape prevents movement and alignment problems. Surf tape is available in a conductive form.


Semiconductor Packaging Materials offers a variety of reel sizes. Different customers have different reeling requirements depending on the usage of the part, and the type of automated equipment being used. Larger reel sizes typically mean more uptime on the equipment due to fewer changeovers.


Semiconductor Packaging Materials creates custom engineered solutions for tape on reel loading - each customer requirement must be evaluated for the following properties:
Size
Orientation (which side is up)
Anti-Static nature
Conductive properties
Reel Size
Quantity per reel


Semiconductor Packaging Materials' tape on reel packaging offers many advantages to the customer. Semiconductor Packaging Materials taped products are pick and place ready - a perfect solution for high volume, low cost operations. The use of taped products permits exact consumption - eliminating waste, shrinkage and other material losses. Using taped components eliminates the need for capital equipment including shaker tables and other part alignment and orientation devices.


Semiconductor Packaging Materials has built taping capacity around the notion of one-stop shopping for its customers. Semiconductor Packaging Materials is the only US-based company stamping and taping it's own products. One stop shopping means fewer headaches, qualifications, and paperwork for Semiconductor Packaging Materials' customers.